-
1 × $5,781.00 -
-
1 × $2,890.00 -
1 × $2,078.00 -
1 × $959.00 -
-
1 × $4,315.00 -
1 × $1,155.00 -
1 × $1,512.00 -
1 × $25,197.00 -
1 × $145.00 -
1 × $4,139.00 -
-
1 × $2,392.00 -
-
1 × $520.00 -
1 × $5,781.00
-
2 × $10,222.00 -
-
1 × $4,091.00 -
1 × $52,994.00 -
1 × $6,787.00
-
-
-
1 × $335.00 -
1 × $3,016.00
-
1 × $1,449.00 -
1 × $14,761.00 -
-
1 × $5,610.00 -
1 × $8,885.00 -
1 × $1,798.00 -
1 × $326.00 -
1 × $5,241.00 -
-
1 × $2,396.00 -
1 × $2,078.00 -
1 × $214.00 -
2 × $109.00 -
1 × $318.00 -
1 × $702.00 -
1 × $20,683.00 -
1 × $222.00 -
1 × $20,457.00 -
1 × $11,633.00 -
-
-
1 × $1,094.00 -
1 × $448.00 -
-
1 × $1,337.00 -
1 × $322.00 -
1 × $339.00 -
1 × $6,971.00 -
1 × $2,887.00 -
1 × $3,217.00 -
1 × $27,593.00 -
1 × $1,234.00 -
1 × $9,403.00 -
1 × $867.00 -
1 × $3,213.00 -
RIGOL DSA875-TG: Precision RF Spectrum Analyzer with Tracking Generator for Enhanced Signal Analysis1 × $4,539.00 -
1 × $3,734.00
-
1 × $1,826.00 -
1 × $4,223.00 -
1 × $360.00 -
Keysight 87106C/024/161/SMA: High-Performance Multiport Coaxial Switch for Demanding RF Applications1 × $2,467.00 -
1 × $1,449.00 -
-
1 × $3,702.00 -
-
EA Elektro-Automatik EA-PS 10060-120 2U DC Power Supply, Autoranging, Single Output, 60 VDC, 120 ADC1 × $3,442.00 -
-
- Fast heat-ups and accurate temperature control to 600° C
- 50 to 600 C, 240VAC, 50/60 Hz
- Safer operation than oil baths
- Dry, inert, nontoxic aluminum oxide ensures hazard-free operation
- Baths use aluminum oxide fluidized by low-pressure air as a dry bath medium with excellent heat transfer properties.
- Safe to use—aluminum oxide is nonflammable and will not corrode your sample vessels or produce toxic fumes.
- Vessels of all shapes can be easily immersed and safely removed from the bath, without the hazard and mess of hot oils.
- Make temperature adjustments via a control knob and reference dial. Achieve bath control and temperature stability of 0.3°C (1°C for 01184-50) under stable conditions.
- For repeatability and temperature stability to /-0.2°C, use temperature controller (sold separately).
- These baths require a dry air flow of approximately 3 cu ft/minute at about 3 psi pressure, order an air pump separately.
- If your laboratory is already equipped with an air line, it must first be fitted with a filter and pressure regulator, order separately below.
Reviews
There are no reviews yet.