-
1 × $8,630.00 -
2 × $393.00 -
1 × $10,196.00 -
1 × $1,105.00 -
1 × $322.00 -
1 × $1,055.00 -
-
2 × $1,634.00 -
1 × $536.00 -
1 × $184.00 -
-
1 × $1,164.00 -
-
1 × $1,877.00 -
1 × $997.00 -
1 × $494.00 -
1 × $118.00 -
1 × $3,749.00 -
-
1 × $515.00 -
1 × $3,050.00 -
1 × $205.00 -
1 × $574.00 -
1 × $1,299.00 -
-
1 × $5,195.00 -
1 × $997.00 -
1 × $113.00 -
1 × $1,684.00 -
1 × $8,572.00 -
1 × $1,634.00 -
1 × $1,068.00 -
1 × $759.00 -
1 × $1,985.00 -
-
1 × $176.00 -
1 × $2,468.00 -
1 × $2,193.00 -
1 × $2,446.00 -
1 × $1,809.00 -
1 × $6,234.00 -
-
1 × $222.00 -
1 × $3,066.00 -
1 × $779.00 -
1 × $163.00 -
1 × $14,774.00 -
1 × $4,671.00 -
1 × $2,161.00 -
-
1 × $1,299.00
-
1 × $8,063.00 -
-
1 × $855.00 -
-
1 × $3,217.00 -
1 × $1,549.00 -
1 × $1,680.00 -
1 × $498.00 -
1 × $2,262.00 -
1 × $144.00 -
1 × $2,226.00 -
1 × $11,141.00 -
1 × $974.00 -
1 × $270.00 -
1 × $1,905.00 -
1 × $310.00 -
1 × $8,630.00
-
1 × $24,819.00 -
1 × $1,227.00 -
1 × $294.00 -
-
1 × $6,753.00 -
1 × $8,630.00 -
1 × $1,098.00 -
1 × $2,392.00 -
1 × $4,901.00 -
2 × $322.00 -
1 × $1,977.00 -
1 × $1,826.00 -
1 × $1,357.00 -
-
1 × $569.00 -
1 × $2,179.00 -
1 × $1,273.00 -
1 × $2,111.00 -
1 × $2,570.00 -
1 × $959.00 -
1 × $2,262.00 -
1 × $2,240.00 -
1 × $1,063.00 -
1 × $1,131.00 -
1 × $261.00 -
1 × $173.00 -
1 × $1,717.00 -
1 × $674.00 -
1 × $230.00 -
1 × $18,350.00 -
1 × $959.00
- Save over $117 with the PIE 434 F VIP Kit.
- Limited Time Offer.
- FREE Fenix PD35 LED Flashlight, 960 Lumens with Batteries
- FREE 128 Pack of Green Calibration Labels
- Calibrate Milliamp Instruments: Source 0.000 to 24.000 mA & -25.00 to 125.00% of 4-20 mA Read 0.000 to 24.000 mA & -25.00 to 125.00% of 4-20 mA Read -99.99 to 99.99 V Simulate 2-Wire Transmitter, Power & Read Transmitters Menu Selectable 250 Ohm resistor for HART compatibility
- Calibrate with Lab Accuracy: Accurate to ±(0.01% of Reading 0.002 mA) PIECAL 434 is more accurate than similar calibrators within ±0.004 mA at 20 mA output!
- Easy-to-Read Backlit Display
- Locate Loop Current Leakages: Automatic indication of Loop Current and Leakage Current. Measure ground current leakage from faulty wiring, flooded conduit and corrosion bridges. Leakage typically appears as a Zero Shift and helps you decide if the transmitter needs calibration or if there is a problem in the loop wiring.
- Faster Calibrations: Three output EZ-CHECK switch 2 speed EZ-DIAL Stepping & Ramping
- Includes Rubber Boot, Test Leads and hands free carrying case
Reviews
There are no reviews yet.