-
1 × $1,634.00
-
1 × $1,253.00
-
1 × $348.00
-
1 × $737.00
-
1 × $951.00
-
1 × $947.00
-
3 × $3,368.00
-
1 × $25,179.00
-
1 × $959.00
-
1 × $1,063.00
-
1 × $1,173.00
-
1 × $278.00
-
1 × $9,744.00
-
1 × $423.00
-
1 × $1,123.00
-
1 × $1,005.00
-
1 × $545.00
-
1 × $4,374.00
-
1 × $7,951.00
-
1 × $6,058.00
-
1 × $6,104.00
-
1 × $180.00
-
1 × $2,262.00
-
1 × $322.00
-
1 × $1,231.00
-
1 × $5,555.00
-
1 × $4,416.00
-
1 × $1,072.00
-
1 × $555.00
-
1 × $189.00
-
1 × $2,882.00
-
1 × $105.00
-
1 × $503.00
-
1 × $322.00
-
1 × $1,634.00
-
1 × $1,663.00
-
1 × $1,508.00
-
1 × $4,206.00
- Energy loss calculator: Classic active and reactive power measurements, unbalance and harmonic power, are quantified to pinpoint true system energy losses in dollars (other local currencies available)
- Power inverter efficiency: Simultaneously measure AC output power and DC input power for power electronics systems using optional DC clamp
- PowerWave data capture: 435 and 437 Series II analyzers capture fast RMS data, show half-cycle and waveforms to characterize electrical system dynamics (generator start-ups, UPS switching etc.)
- Waveform capture: 435 and 437 Series II models capture 100/120 cycles (50/60Hz) of each event that is detected in all modes, without set-up
- Automatic Transient Mode: 435 analyzers capture 200 kHz waveform data on all phases simultaneously up to 6 kV
- Fully Class-A compliant: 435 Series II analyzers conduct tests according to the stringent international IEC 61000-4-30 Class-A standard
- Mains signaling: analyzers measure interference from ripple control signals at specific frequencies
- 400 Hz measurement: 437 Series II analyzer captures power quality measurements for avionic and military power systems
- Troubleshoot real-time: Analyze the trends using the cursors and zoom tools
- Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III rated for use at the service entrance
- Measure all three phases and neutral: With included four flexible current probes with enhanced thin flex designed to fit into the tightest places
- Automatic Trending: Every measurement is always automatically recorded, without any set-up
- System-Monitor: Ten power quality parameters on one screen according to EN50160 power quality standard
- Logger function: Configure for any test condition with memory for up to 600 parameters at user defined intervals
- View graphs and generate reports: With included analysis software
>
Each Unit Includes
- BC430 Power Adapter
- International plug adapter set
- BP290 (Single capacity Li-ion battery) 28Wh (7 hours or more)
- Leads TL430 Test lead and Alligator clip set
- Color coding WC100 color coding clips and regional decals
- Flexible current probes i430flex-TF, 24 inch (61cm) length
- 8 GB SD card (32GB optionally)
- PowerLog on CD (includes operator manuals in PDF format)
- USB cable A-Bmini
- Carrying case C1740 Soft Case













Reviews
There are no reviews yet.