-
2 × $623.00
-
4 × $339.00
-
1 × $2,193.00
-
3 × $855.00
-
2 × $574.00
-
1 × $1,449.00
-
1 × $997.00
-
1 × $239.00
-
1 × $2,539.00
-
3 × $652.00
-
3 × $691.00
-
1 × $1,407.00
-
3 × $322.00
-
1 × $2,687.00
-
1 × $5,437.00
-
1 × $1,873.00
-
1 × $1,256.00
-
1 × $188.00
-
2 × $498.00
-
3 × $270.00
-
1 × $952.00
-
1 × $3,091.00
-
1 × $1,910.00
-
1 × $2,271.00
-
2 × $624.00
-
1 × $959.00
-
1 × $120.00
-
2 × $280.00
-
2 × $324.00
-
1 × $959.00
-
1 × $3,435.00
-
1 × $1,098.00
-
2 × $407.00
-
1 × $516.00
-
1 × $1,798.00
-
1 × $6,169.00
-
1 × $1,449.00
-
1 × $23,054.00
-
2 × $360.00
-
1 × $14,077.00
-
1 × $1,634.00
-
1 × $5,561.00
-
2 × $318.00
-
1 × $1,680.00
-
1 × $968.00
-
3 × $310.00
-
1 × $5,325.00
-
1 × $1,559.00
-
1 × $1,521.00
-
3 × $867.00
-
1 × $1,856.00
-
2 × $1,977.00
-
1 × $479.00
-
1 × $1,823.00
-
1 × $2,061.00
-
2 × $322.00
-
2 × $381.00
-
1 × $804.00
-
1 × $3,217.00
-
2 × $322.00
-
1 × $1,773.00
-
1 × $6,299.00
-
1 × $905.00
-
1 × $25,504.00
-
1 × $5,195.00
-
1 × $6,239.00
-
2 × $14,269.00
-
1 × $3,327.00
-
1 × $147.00
-
1 × $643.00
-
2 × $6,008.00
-
1 × $322.00
-
1 × $5,375.00
-
1 × $6,271.00
-
1 × $603.00
-
1 × $25,504.00
-
1 × $322.00
-
1 × $1,823.00
-
1 × $473.00
-
2 × $370.00
-
1 × $955.00
-
1 × $113.00
-
1 × $3,903.00
-
1 × $1,005.00
-
1 × $8,766.00
-
1 × $7,078.00
-
1 × $2,598.00
-
1 × $6,787.00
-
1 × $477.00
-
1 × $2,626.00
-
1 × $322.00
-
1 × $1,449.00
-
1 × $109.00
-
1 × $2,392.00
-
1 × $192.00
- Energy loss calculator: Classic active and reactive power measurements, unbalance and harmonic power, are quantified to pinpoint true system energy losses in dollars (other local currencies available)
- Power inverter efficiency: Simultaneously measure AC output power and DC input power for power electronics systems using optional DC clamp
- PowerWave data capture: 435 and 437 Series II analyzers capture fast RMS data, show half-cycle and waveforms to characterize electrical system dynamics (generator start-ups, UPS switching etc.)
- Waveform capture: 435 and 437 Series II models capture 100/120 cycles (50/60Hz) of each event that is detected in all modes, without set-up
- Automatic Transient Mode: 435 analyzers capture 200 kHz waveform data on all phases simultaneously up to 6 kV
- Fully Class-A compliant: 435 Series II analyzers conduct tests according to the stringent international IEC 61000-4-30 Class-A standard
- Mains signaling: analyzers measure interference from ripple control signals at specific frequencies
- 400 Hz measurement: 437 Series II analyzer captures power quality measurements for avionic and military power systems
- Troubleshoot real-time: Analyze the trends using the cursors and zoom tools
- Highest safety rating in the industry: 600 V CAT IV/1000 V CAT III rated for use at the service entrance
- Measure all three phases and neutral: With included four flexible current probes with enhanced thin flex designed to fit into the tightest places
- Automatic Trending: Every measurement is always automatically recorded, without any set-up
- System-Monitor: Ten power quality parameters on one screen according to EN50160 power quality standard
- Logger function: Configure for any test condition with memory for up to 600 parameters at user defined intervals
- View graphs and generate reports: With included analysis software
>
Each Unit Includes
- BC430 Power Adapter
- International plug adapter set
- BP290 (Single capacity Li-ion battery) 28Wh (7 hours or more)
- Leads TL430 Test lead and Alligator clip set
- Color coding WC100 color coding clips and regional decals
- Flexible current probes i430flex-TF, 24 inch (61cm) length
- 8 GB SD card (32GB optionally)
- PowerLog on CD (includes operator manuals in PDF format)
- USB cable A-Bmini
- Carrying case C1740 Soft Case













Reviews
There are no reviews yet.