-
1 × $5,392.00 -
1 × $607.00 -
1 × $189.00 -
1 × $3,105.00 -
1 × $1,005.00 -
-
1 × $1,391.00 -
1 × $1,457.00 -
1 × $308.00 -
1 × $101.00 -
1 × $1,080.00 -
1 × $3,368.00 -
1 × $343.00 -
-
1 × $271.00 -
1 × $1,449.00 -
1 × $2,161.00 -
1 × $123.00 -
1 × $318.00 -
1 × $959.00 -
1 × $1,173.00 -
-
1 × $2,392.00 -
1 × $3,368.00 -
1 × $201.00 -
1 × $385.00 -
1 × $1,680.00 -
1 × $2,283.00 -
1 × $3,837.00 -
1 × $214.00 -
1 × $3,904.00 -
1 × $1,893.00 -
1 × $310.00 -
1 × $4,374.00 -
1 × $1,960.00 -
-
1 × $184.00 -
1 × $200.00 -
1 × $3,432.00 -
1 × $5,446.00 -
1 × $192.00 -
1 × $1,659.00 -
1 × $477.00 -
1 × $5,002.00 -
1 × $176.00 -
-
1 × $1,457.00 -
-
1 × $817.00 -
1 × $116.00 -
1 × $515.00
The FLIR CM82 is an industrial grade 600A Power Clamp Meter with variable frequency drive (VFD) and Harmonics functions designed for advanced power analysis.
- VFD Mode
- Accurately analyze non-sinusoidal waveforms and noisy signals in VFD-controlled equipment.
>
- Harmonics Mode
- Locate noise from different electrical draws to realign harmonics and reduce electro-mechanical equipment stress.
>
- Phase Rotation
- Analyze three-phase systems to measure power draw and verify if power is evenly balanced.
>
- Inrush Current
- Measure hard and soft start-up inrush current spikes while equipment is ramping up.
>
- Power Factor and Active Power
- Monitor power quality improvements, such as start-up realignments on three-phase equipment.
>
- Bright Dual-LED Worklights
- Make your work safer/easier in poorly lit locations – especially useful when the lights are out or obstacles block your inspection targets.
>
- Rugged & Shock-Resistant
- Double-molded case design and extra thick rubber on the corners absorbs shock to enhance job-site reliability and long-haul durability.
>
Reviews
There are no reviews yet.