-
1 × $959.00 -
2 × $393.00 -
1 × $3,409.00 -
1 × $244.00 -
1 × $163.00 -
2 × $515.00 -
-
1 × $1,453.00 -
1 × $105.00 -
1 × $1,063.00 -
1 × $163.00 -
1 × $1,449.00 -
1 × $2,921.00 -
1 × $1,449.00 -
1 × $1,512.00 -
-
1 × $6,853.00 -
2 × $477.00 -
1 × $674.00 -
1 × $1,449.00 -
1 × $1,893.00 -
1 × $1,512.00 -
2 × $9,744.00 -
1 × $1,798.00 -
1 × $2,564.00 -
1 × $3,652.00 -
1 × $16,105.00 -
1 × $324.00 -
1 × $1,273.00 -
1 × $624.00 -
1 × $1,449.00 -
1 × $205.00 -
1 × $6,208.00 -
1 × $322.00 -
1 × $242.00 -
-
-
-
-
1 × $5,698.00 -
1 × $2,974.00 -
1 × $955.00 -
1 × $270.00 -
1 × $167.00 -
-
1 × $5,144.00
- “Fluke 725” already exists in your wishlist
- Range to 660°C
- Meets all ITS-90 reMeets all ITS-90 requirements for resistance ratios
- Rtp drift <, 20mK after 500 hours at 660°C
- Strain-free sensor design by Harts SPRT engineers
- High-temp PRT, 25.5 Ohm, 305 mm (12 in)
- If youre using block calibrators, furnaces, or temperature points above normal PRT temperatures (420 °C), then these two PRTs are for you
- The 5626 is nominally 100ohms and the 5628 is nominally 25.5 Ohms
- Both instruments have a temperature range of -200 °C to 661 °C
- They make great working or check standards for calibration work up to the aluminum point
- Using a regular PRT at temperatures above 500°C exposes the platinum to contamination
- If the PRT is used as a reference or calibration standard, contamination is a major problem
- SPRTs, which are more expensive and delicate, can handle the higher temperatures, but with greater risk to the instrument due to shock, contamination, or mishandling
- The 5626 and 5628 are designed to reduce the contamination risk through the use of internal protection while not impairing performance
Reviews
There are no reviews yet.